12V LED Strobe Lights
Add a bright visual alert to a compatible receiver's relay output for spaces where sound alone may be missed.
Starting at $14.00
Shop strobesERA-DCRX 12V ACCESSORIES
12V Strobes, Sirens, Bells & Alert Accessories
Add strobes, sirens, bells, and matched accessories without guessing at compatibility.
This archive is primarily for 12V DC accessories used from the ERA-DCRX output path: visual strobes, sirens, bells, and related alert add-ons.
12V DC strobes & sirensERA-DCRX compatibleVisual & audio add-ons
12V DC
Output Path
100+ dB
Siren Range
ERA
Primary Receiver
Loud Audio Alert Devices
Increase alert volume with sirens and bells that wire into a compatible 12V DC receiver output.
Starting at $16.98
Shop sirensStrobe + Siren Combos
Pair a strobe light with a siren in a single device for both visual and audio notification from one output.
Starting at $14.00
Shop combos
Loud Alarm Bell: SS-FIREBELL-12V
SKU: SS-FIREBELL12V
The SS-FIREBELL-12V is a 12V DC alarm bell that adds a loud 100dB signal to an alert system. Its motor-driven 6-inch gong cuts through noisy, industrial, and warehouse spaces, and it wires to any 12V DC output such as the ERA-DCRX receiver. Quick-connect terminals, RFI/EMI suppression, and indoor/outdoor rating make it straightforward to add.
$16.98
Chrome Door Bell: DB-2000
SKU: DB-2000
The DB-2000 is a chrome-plated wired door bell buzzer for shop and warehouse entrances. At 2.5 inches in diameter, it runs on 4.5-12V DC or 8-16V AC and wires to a single door for a clear entry or delivery alert. It needs a transformer, push button, and bell wire to complete the installation.
$18.95
Adjustable Volume Siren: SS-PSIREN-W
SKU: SS-PSIREN-W
The SS-PSIREN-W adjustable volume siren puts out 85-120 dB through an internal volume knob and two selectable tones, so you can set the alert level to the room. It runs on 12V DC, draws 100 mA or less, and wires into ERA receivers or any 12V output. The weather-resistant piezo housing suits warehouses, production floors, and mixed quiet-and-noisy spaces.
$19.98
Loud External Siren: 115dB Alert
SKU: SS-SIREN
SS-SIREN is a siren for making an alert louder in shops, warehouses, counters, or work areas. Increase alert volume where a normal receiver is too easy to miss.
$19.98
Strobe Light with Siren: SS-STROBESIREN
The SS-STROBESIREN is a combination strobe light and siren that pairs a 110dB siren with a strobe flashing 120 times per minute. It runs on 12V DC, draws 70mA, and comes in red or blue with a flame-retardant ABS housing, making it a clear audio-visual alert for entry points, restricted areas, and warehouse or industrial spaces.
$14.00
View details
LED Strobe Accessory: SS-STROBE
The SS-STROBE-12V is a 12V LED strobe accessory that adds a bright visual alert to a compatible alert receiver. It flashes 140 times per minute, comes in multiple colors, and has a weatherproof, impact-resistant build rated from -4° to 140°F. Wire it to a 12V DC output such as the ERA-DCRX receiver for indoor or outdoor use.
$14.00
View detailsAccessories series
Built for the ERA-DCRX Receiver Output
These accessories are designed around the ERA-DCRX 12V DC relay output, adding visual and audio alert options to a compatible system.
🔆
Visual Alert Path
12V LED strobes add a bright flashing signal to an ERA-DCRX receiver for spaces where sound may be insufficient.
🔊
Louder Audio Alerts
Sirens and bells increase volume in noisy shops, warehouses, and work areas where a chime alone can be missed.
🔧
Simple Wiring
Most accessories wire directly into the ERA-DCRX relay output without additional controllers or adapters.
âš¡
12V DC Compatible
Check the output type and power requirements before pairing an accessory with non-ERA hardware.
ERA-DCRX resources
Use the right receiver, guide, and sound reference before wiring 12V accessories.
Find the ERA-DCRX receiver, the setup guides, and the accessory sound previews that help you choose the right alert device.
Shop ERA receivers
Start with ERA receivers that support the accessory-output path needed for 12V DC strobes, bells, and sirens.
Open resourceProgram the ERA-DCRX
Use the ERA-DCRX setup guide before pairing accessories into an active receiver path.
Open resourceWire the DB-2000 bell
Follow the bell connection guide when adding a hardwired alert output to the ERA-DCRX.
Open resourcePreview accessory sounds
Listen to the bell and siren sounds tied to the 12V DC accessory group before choosing a notification device.
Open resourceInstall planning
Plan an ERA-DCRX accessory install.
Start with the receiver: confirm the site is using an ERA-DCRX or another compatible 12V DC output. Then choose the alert device — strobe, siren, bell, or combination unit — based on where the signal must be seen or heard, and use the setup guides before wiring the accessory into the notification path.
Common questions
Wireless doorbell buying questions, answered.
What receiver is this accessories page built around?
These 12V DC accessories are primarily positioned for the ERA-DCRX because it is the receiver in the Safeguard lineup that provides the 12V DC output path for powered alert devices.
Can these accessories work with non-ERA equipment?
Some can, but only when the other device provides the correct 12V DC output and wiring path. Check power and connection requirements before pairing an accessory with non-ERA hardware.
When should I choose a strobe instead of a siren or bell?
Choose a strobe when the alert must be seen, a siren or bell when it must cut through noise, and a combo unit when the site needs both visual and audible notification.