Will this work with every Safeguard product?
Not always. Accessories should be paired with compatible products from the correct ERA, LRA, or SS family.
Sale4 interest-free payments of $5.00 with Afterpay
SS-SIREN is a siren for making an alert louder in shops, warehouses, counters, or work areas. Increase alert volume where a normal receiver is too easy to miss.
Free shipping on orders over $100!
Expand or complete your system with compatible components.

ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.

ERA-UTDCR
The ERA-UTDCR wireless door alert system covers up to 4,000 ft and supports up to 12 transmitters with unlimited receivers, which suits warehouse entrance alerts and large commercial buildings. It offers 4-zone programming, selectable chimes, four 12V DC outputs, and a C-FORM relay for tying into other equipment. The kit installs plug-and-play with no special tools.

SS-FIREBELL12V
The SS-FIREBELL-12V is a 12V DC alarm bell that adds a loud 100dB signal to an alert system. Its motor-driven 6-inch gong cuts through noisy, industrial, and warehouse spaces, and it wires to any 12V DC output such as the ERA-DCRX receiver. Quick-connect terminals, RFI/EMI suppression, and indoor/outdoor rating make it straightforward to add.

DB-2000
The DB-2000 is a chrome-plated wired door bell buzzer for shop and warehouse entrances. At 2.5 inches in diameter, it runs on 4.5-12V DC or 8-16V AC and wires to a single door for a clear entry or delivery alert. It needs a transformer, push button, and bell wire to complete the installation.

SS-STROBESIREN
The SS-STROBESIREN is a combination strobe light and siren that pairs a 110dB siren with a strobe flashing 120 times per minute. It runs on 12V DC, draws 70mA, and comes in red or blue with a flame-retardant ABS housing, making it a clear audio-visual alert for entry points, restricted areas, and warehouse or industrial spaces.

SS-STROBE
The SS-STROBE-12V is a 12V LED strobe accessory that adds a bright visual alert to a compatible alert receiver. It flashes 140 times per minute, comes in multiple colors, and has a weatherproof, impact-resistant build rated from -4° to 140°F. Wire it to a 12V DC output such as the ERA-DCRX receiver for indoor or outdoor use.

SS-SIREN
SS-SIREN is a siren for making an alert louder in shops, warehouses, counters, or work areas. Increase alert volume where a normal receiver is too easy to miss.
1 item selected · Total: $20.00
SS-SIREN is a siren for making an alert louder in shops, warehouses, counters, or work areas. It is best used as an added notification point, not as the only planning piece in the alert system.
SS-SIREN is a siren for making an alert louder in shops, warehouses, counters, or work areas. It is best used as an added notification point, not as the only planning piece in the alert system.
Confirm the receiver or relay output can power or trigger the accessory. These add-ons are for stronger notification, not for replacing the main receiver.
No reviews yet. If you've installed this system, we'd like to hear how it went.
Product questions answered by our team.
No answered questions yet for Loud External Siren: 115dB Alert.
Not always. Accessories should be paired with compatible products from the correct ERA, LRA, or SS family.
Manuals and pairing guidance belong close to the purchase area when available.
Start with compatible receivers, transmitters, sensors, strobes, or sirens from the same system family.
Use an ERA-DCRX zone’s 12V DC output to power a compatible alert accessory when that zone activates. Check the accessory’s current requirements and polarity before connecting it. If the accessory needs a separate power supply, check whether the receiver’s C-FORM relay and the accessory’s wiring are compatible.
Read full answer →Q&ACompare strobe wire distances and plan accessory loads for the ERA-DCRX. Each 12 V DC zone output can supply up to 900 mA. Only one zone activates at a time.
Read full answer →Compare product families

SKU: DB-2000
The DB-2000 is a chrome-plated wired door bell buzzer for shop and warehouse entrances. At 2.5 inches in diameter, it runs on 4.5-12V DC or 8-16V AC and wires to a single door for a clear entry or delivery alert. It needs a transformer, push button, and bell wire to complete the installation.

SKU: SS-STROBE
The SS-STROBE-12V is a 12V LED strobe accessory that adds a bright visual alert to a compatible alert receiver. It flashes 140 times per minute, comes in multiple colors, and has a weatherproof, impact-resistant build rated from -4° to 140°F. Wire it to a 12V DC output such as the ERA-DCRX receiver for indoor or outdoor use.

SKU: SS-PSIREN-W
The SS-PSIREN-W adjustable volume siren puts out 85-120 dB through an internal volume knob and two selectable tones, so you can set the alert level to the room. It runs on 12V DC, draws 100 mA or less, and wires into ERA receivers or any 12V output. The weather-resistant piezo housing suits warehouses, production floors, and mixed quiet-and-noisy spaces.

SKU: SS-FIREBELL12V
The SS-FIREBELL-12V is a 12V DC alarm bell that adds a loud 100dB signal to an alert system. Its motor-driven 6-inch gong cuts through noisy, industrial, and warehouse spaces, and it wires to any 12V DC output such as the ERA-DCRX receiver. Quick-connect terminals, RFI/EMI suppression, and indoor/outdoor rating make it straightforward to add.