4 interest-free payments of $23.99 with Afterpay
The ERA-UTDCR wireless door alert system covers up to 4,000 ft and supports up to 12 transmitters with unlimited receivers, which suits warehouse entrance alerts and large commercial buildings. It offers 4-zone programming, selectable chimes, four 12V DC outputs, and a C-FORM relay for tying into other equipment. The kit installs plug-and-play with no special tools.
Free shipping on orders over $100!
Expand or complete your system with compatible components.
ERA-RXPG
The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.
ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.
ERA-VPRX
The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.
ERA-EXTX
The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.
ERA-PIR
The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.
ERA-DSTX
The ERA-DSTX is an outdoor wireless motion detector with a 4,000 ft range and PIR sensing that picks up both vehicles and people. It works with every ERA receiver, including the ERA-DCRX desktop and ERA-VPRX portable units, and its weather-resistant housing holds up outdoors year-round. Use it as a driveway motion alarm or an entryway alert on large properties.
ERA-UTDCR
The ERA-UTDCR wireless door alert system covers up to 4,000 ft and supports up to 12 transmitters with unlimited receivers, which suits warehouse entrance alerts and large commercial buildings. It offers 4-zone programming, selectable chimes, four 12V DC outputs, and a C-FORM relay for tying into other equipment. The kit installs plug-and-play with no special tools.
1 item selected · Total: $95.95
The ERA-UTDCR is a commercial wireless door chime system with a 4,000 ft range, built to cover large facilities where a consumer doorbell falls short. It reaches across steel, concrete, and multi-room layouts to keep alerts consistent from the loading dock to the front office. It is part of the ERA series.
The ERA-UTDCR is a commercial wireless door chime system with a 4,000 ft range, built to cover large facilities where a consumer doorbell falls short. It reaches across steel, concrete, and multi-room layouts to keep alerts consistent from the loading dock to the front office. It is part of the ERA series.
Each system supports up to 12 transmitters — push buttons, motion sensors, and door contacts — paired with unlimited receivers, so you can build an alert network across the whole operation.
The ERA-UTDCR is plug-and-play and needs no specialized tools or wiring, so you can set it up and start using it the same day.
No reviews yet. If you've installed this system, we'd like to hear how it went.
Product questions answered by our team.
No answered questions yet for Wireless Door Alert System: ERA-UTDCR.
Use these PDFs for installation, pairing, troubleshooting, and compliance details when they are included by the manufacturer.
Download the PDF resource for setup, product details, and support reference.
No. ERA is strongest for warehouses and large commercial spaces, but it also fits retail stores, offices, delivery doors, and remote entrances.
ERA receiver messaging highlights 12V DC outputs and C-FORM relay options on compatible models for external alert devices.
Yes. Concrete, brick, metal, and other materials reduce effective distance compared with open line-of-sight range.
Most modern wireless doorbell systems support multiple push buttons with distinct sounds. This guide explains how different manufacturers implement this feature and how to set it up.
Read full answer →Q&AConnect a DB-2000 bell to your ERA-DCRX receiver for enhanced sound output in noisy commercial environments. The ERA-DCRX delivers 95 dBA at 5 feet and supports various 12V DC alerting devices.
Read full answer →Compare product families
SKU: ERA-PRXPG
The Safeguard Supply ERA-PRXPG is an indoor motion sensor kit that pairs an ERA-PIR passive infrared sensor with an ERA-RXPG plug-in receiver featuring a bright strobe light. The ERA-PIR monitors a doorway, hallway, or interior zone and sends a wireless signal up to 4,000 feet to the receiver when motion is detected. The ERA-RXPG then provides an audible chime, a flashing strobe, or both, making it useful in loud environments or for users who need a visual alert.
SKU: ERA-DSTX
The ERA-DSTX is an outdoor wireless motion detector with a 4,000 ft range and PIR sensing that picks up both vehicles and people. It works with every ERA receiver, including the ERA-DCRX desktop and ERA-VPRX portable units, and its weather-resistant housing holds up outdoors year-round. Use it as a driveway motion alarm or an entryway alert on large properties.
SKU: ERA-PIR-SPK
The ERA-PIR-SPK is a standalone outdoor-doorway motion sensor with a built-in 90dB speaker. Mounted over an entrance, it sounds a tone when someone passes, and its adjustable bracket aims the detection beam straight down to catch entries without picking up general foot traffic. Battery life runs about 18 months at 50 triggers per day, making it a fit for convenience stores and small businesses.
SKU: ERA-PBVPRX
The Safeguard Supply ERA-PBVPRX is a wireless doorbell kit that pairs an ERA-PBTX long-range push button with an ERA-VPRX portable receiver. Mount the weather-resistant button at an entrance or gate and carry the portable receiver on a belt or in a pocket to get sound and vibration alerts up to 4,000 feet away. This kit is ideal for warehouses, shops, and offices where staff need to know when visitors arrive without staying near a fixed chime.
