Skip to main content
678-214-4212
Safeguard Supply

Image 1 of 3: Era Rxpg Plugin Receiver With Strobe Light Jpg
Era Rxpg Plugin Receiver With Strobe Light Jpg
Hearing-accessible notification

Plugin Strobe Light Alert Receiver: ERA-RXPG

$43.95
In stock

4 interest-free payments of $10.99 with Afterpay

The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.

Best forHearing support and noisy spaces
Alert pathFlashing strobe plus optional sound
Setup focusReceiver visibility and placement

SKU: ERA-RXPG

Category: ERA Series

Brand: Safeguard Supply

PDF user manualView installation and setup guideReceiver soundsPreview ERA receiver sounds

Free shipping on orders over $100!

Satisfaction Guaranteed
Live Customer Support
Secure Payments
Guaranteed Safe Checkout
VisaMastercardAmexDiscoverPayPalApple PayG Pay

Accessories & Add-Ons

Expand or complete your system with compatible components.

Era Pbtx Wireless Push Button With Almost Mile Range Jpg
Wireless Doorbell Button: ERA-PBTX

ERA-PBTX

The ERA-PBTX wireless doorbell button transmits up to 4,000 ft to any ERA receiver, with a green LED for nighttime visibility and a weatherproof housing rated from -4°F to 140°F. The included lithium battery lasts 2-3 years, and you can mount it with the supplied tape or screws. A dependable outdoor doorbell button for large properties, gates, and driveways.

$29.00
Era Extx Wired Doorbell Wireless Transmitter Jpg
Doorbell Signal Transmitter: ERA-EXTX

ERA-EXTX

The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.

$35.00
Era Pir Front 2 Jpg
Wireless Motion Sensor: ERA-PIR

ERA-PIR

The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.

$39.00
Era Utx Transmitter Contact Jpg
Wireless Door Sensor Button: ERA-UTX

ERA-UTX

The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.

$50.00
Era Dstx Driveway Sensor For Era Series Alarm Kits Jpg
ERA-DSTX Wireless Driveway Motion Sensor

ERA-DSTX

The ERA-DSTX is an outdoor wireless motion detector with a 4,000 ft range and PIR sensing that picks up both vehicles and people. It works with every ERA receiver, including the ERA-DCRX desktop and ERA-VPRX portable units, and its weather-resistant housing holds up outdoors year-round. Use it as a driveway motion alarm or an entryway alert on large properties.

$55.00
Era Dcrx Safeguard Supply Jpg
Door Chime for Business: ERA-DCRX

ERA-DCRX

The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.

$54.00
Era Rxpg Plugin Receiver With Strobe Light Jpg
Plugin Strobe Light Alert Receiver: ERA-RXPGThis product

ERA-RXPG

The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.

$43.95

1 item selected · Total: $43.95

WHY THIS SYSTEM

Make door and sensor alerts visible, not just audible.

The ERA-RXPG is a plug-in receiver that pairs with up to 12 different ERA transmitters and sensors, so one unit can cover push buttons, motion sensors, and doorbell extenders across the property.

  • +Clear visual notification for doorbells, sensors, or compatible transmitters.
  • +Useful in noisy shops, apartments, senior living spaces, and hard-of-hearing households.
  • +Pairs naturally with receivers that offer strobe-only, sound-only, or combined alert modes.
  • +Makes alerts visible for hard-of-hearing users, seniors, and loud spaces.
  • +Helps prevent missed visitors when a standard chime is too quiet or easy to overlook.
  • +Supports day-to-day routines by placing the visual receiver where the user naturally looks.
What the ERA-RXPG does

The ERA-RXPG is a plug-in receiver that pairs with up to 12 different ERA transmitters and sensors, so one unit can cover push buttons, motion sensors, and doorbell extenders across the property.

Notification options
  • Three modes: sound, strobe, or both
  • Volume control: four levels up to 95dB
  • Visual alerts: 15-second strobe activation
  • Custom sounds: multiple melody options
  • One-touch mode switching
Setup and operation
  • Quick programming: easy sensor pairing
  • Compact design: 4.75"H x 2.75"W x 1.5"D
  • Instant operation
  • Portable: move it between outlets as needed
Features
  • Operating range of up to 4,000 ft
  • Three modes of operation:
    • Strobe only: when triggered, the strobe flashes for about 15 seconds
    • Sound only: when triggered, it plays the melody assigned to the programmed sensor or transmitter
    • Sound and strobe
  • Up to 12 different transmitters/sensors can be programmed to each ERA-RXPG
  • Four sound levels; a fifth push of the volume button turns the receiver off, and pushing again returns to the highest level
Specifications
  • Plugs into a standard wall outlet
  • Dimensions: 4.75"H x 2.75"W x 1.5"D
  • FCC certified
  • UL listed
  • Manufactured by Safeguard Supply
  • 1-year warranty
Compatible devices
  • ERA-PIR indoor motion sensor
  • ERA-DSTX outdoor motion sensor
  • ERA-UTX push button/door contact
  • ERA-PBTX outdoor push button
  • ERA-EXTX doorbell transmitter
Installation

Plug the ERA-RXPG into any standard wall outlet and follow the programming guide to pair it with your ERA transmitters and sensors. See the full ERA series for compatible devices.

Power Adapter Specifications and International Use

The ERA-RXPG uses its supplied plug-in AC/DC power adapter.

  • AC input: 100-240V AC, 50/60Hz, 0.3A.
  • DC output: 5V DC, 1.0A (1000mA).
  • Wall plug: US-style two-flat-blade plug (Type A). Indoor use only; keep the adapter dry.
USA and Canada: Connect to a compatible standard wall outlet. Europe and other destinations: On a 100-240V AC, 50/60Hz supply, use a destination-compatible travel plug adapter if the outlet shape differs. Most continental European destinations need a suitable round-pin adapter; the UK and Ireland use Type G, and Australia and New Zealand use Type I. A voltage converter is not needed within the labeled input range. A travel plug adapter changes the plug fit only; it does not change voltage.

Check the label on your own power supply before use, as versions may differ. Keep the correct adapter with its receiver: the ERA-RXPG uses 5V DC; the ERA-DCRX and LRA-PLUG listed here supply 12V DC. Do not interchange adapters based only on plug fit. Replacement voltage, current capacity, connector size and polarity must match the receiver. These ratings apply to receiver power; electrical compatibility alone does not establish wireless approval in another country.

Manuals & resources

Download setup and support documents for this product.

Use these PDFs for installation, pairing, troubleshooting, and compliance details when they are included by the manufacturer.

PDF manual

ERA-PRPXG Programming

Download the PDF resource for setup, product details, and support reference.

  • Installation and setup steps for this product.
  • Pairing, placement, and receiver or transmitter setup notes.
  • Wiring, power, mounting, or accessory connection details.
Download PDF
Common questions

Wireless doorbell buying questions, answered.

Is this only for deaf users?

No. Visual alerts are also useful for seniors, noisy work areas, quiet offices, and anyone who may miss a standard chime.

Can I use sound and strobe together?

Many Safeguard receivers are described with sound and strobe modes, but the exact modes depend on the receiver model.

Where should I place the receiver?

Place visual receivers where the strobe is easy to see from the normal seating, work, or sleeping area.

Setup & compatibility guides

Related FAQ articles for this product family.

Compare product families

You may also like…

ERA-EXVPRX-wired-doorbell-extender-portable-receiver
ERA SeriesSale

Safeguard Supply ERA-EXVPRX Wired Doorbell Extender with Portable Receiver

SKU: ERA-EXVPRX

The Safeguard Supply ERA-EXVPRX is a wired doorbell extender kit that uses an ERA-EXTX doorbell signal transmitter and an ERA-VPRX portable receiver to carry your existing wired doorbell to mobile staff. The ERA-EXTX connects to a standard low-voltage wired chime and sends a wireless signal up to 4,000 feet when a visitor presses the doorbell. The ERA-VPRX rides on a belt or in a pocket and alerts with sound, vibration, or both, so users know a doorbell has been pressed even when they are away from the original chime.

$96.95$79.95
ERA-DSVPRX Driveway Alert Kit with Portable Receiver
ERA Series

Safeguard Supply ERA-DSVPRX Long Range Driveway Alert Kit

SKU: ERA-DSVPRX

The Safeguard Supply ERA-DSVPRX is a long range driveway alert kit that combines an ERA-DSTX outdoor driveway motion sensor with an ERA-VPRX portable receiver. The sensor mounts near the drive and detects vehicles or people up to about 100 feet away, then sends an alert up to 4,000 feet to the handheld receiver. The ERA-VPRX offers sound, vibration, and visual indication so mobile staff know when someone arrives, even away from a desk or counter.

$95.95
Era Vprx Long Range Portable Receiver Jpg
ERA Series

Portable Door Buzzer: ERA-VPRX

SKU: ERA-VPRX

The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.

$62.95
ERA-DSRXPG-Driveway-Montor-Kit
ERA Series

Safeguard Supply ERA-DSRXPG Driveway Monitor Kit

SKU: ERA-DSRXPG

The Safeguard Supply ERA-DSRXPG is a long range driveway monitor kit that pairs an ERA-DSTX outdoor motion sensor with an ERA-RXPG plug-in receiver for monitoring driveways and approach lanes.[web:57][web:60] The sensor mounts near the drive and detects people or vehicles up to about 100 feet away, then sends a wireless signal up to 4,000 feet to the indoor receiver, which can use sound, strobe, or both to indicate activity.[web:57][web:60][web:63]

$86.95