ERA 4,000 Ft Wireless Doorbells, Driveway Alarms & Entrance Alerts

The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.

The ERA-UTDCR wireless door alert system covers up to 4,000 ft and supports up to 12 transmitters with unlimited receivers, which suits warehouse entrance alerts and large commercial buildings. It offers 4-zone programming, selectable chimes, four 12V DC outputs, and a C-FORM relay for tying into other equipment. The kit installs plug-and-play with no special tools.

The ERA-DCKIT is a wireless strobe light doorbell kit with a 4,000 ft range, built for large homes and commercial buildings where an audible chime alone can be missed. It pairs a weatherproof push button with a strobe-equipped receiver that flashes and chimes at the same time. Choose from four volume levels, and add up to 12 transmitters to cover more entrances.

The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones, each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.

The ERA-DSTX is an outdoor wireless motion detector with a 4,000 ft range and PIR sensing that picks up both vehicles and people. It works with every ERA receiver, including the ERA-DCRX desktop and ERA-VPRX portable units, and its weather-resistant housing holds up outdoors year-round. Use it as a driveway motion alarm or an entryway alert on large properties.

The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.

The ERA-PBTX wireless doorbell button transmits up to 4,000 ft to any ERA receiver, with a green LED for nighttime visibility and a weatherproof housing rated from -4°F to 140°F. The included lithium battery lasts 2-3 years, and you can mount it with the supplied tape or screws. A dependable outdoor doorbell button for large properties, gates, and driveways.

The ERA-DSDCR is a driveway alarm system that ships with an outdoor-rated ERA-DSTX PIR sensor and an ERA-DCRX receiver, with a range of up to 4,000 ft. It offers programmable zones, four 12V DC outputs plus a C-FORM relay for accessories, and support for up to 12 sensors. Built for large properties that need reliable vehicle and visitor detection.

The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.

The Safeguard Supply ERA-DSRXPG is a long range driveway monitor kit that pairs an ERA-DSTX outdoor motion sensor with an ERA-RXPG plug-in receiver for monitoring driveways and approach lanes.\[web:57\]\[web:60\] The sensor mounts near the drive and detects people or vehicles up to about 100 feet away, then sends a wireless signal up to 4,000 feet to the indoor receiver, which can use sound, strobe, or both to indicate activity.\[web:57\]\[web:60\]\[web:63\]

The ERA-EXKIT is a wireless doorbell extender that keeps your existing wired doorbell and adds wireless chimes up to 4,000 ft away. When someone presses the button, the wired-in ERA-EXTX transmitter signals the plug-in ERA-RXPG receiver, so you also hear the door in the basement, garage, or a back office. It offers adjustable volume, 12 chime melodies, and an optional strobe light for noisy areas.

ERA-PRDCR is a wireless doorbell kit for setting up a complete alert path without building the system one part at a time. Start with one matched ERA transmitter and receiver setup.

The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.

The ERA-PIR-SPK is a standalone outdoor-doorway motion sensor with a built-in 90dB speaker. Mounted over an entrance, it sounds a tone when someone passes, and its adjustable bracket aims the detection beam straight down to catch entries without picking up general foot traffic. Battery life runs about 18 months at 50 triggers per day, making it a fit for convenience stores and small businesses.

The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.

The Safeguard Supply ERA-PRXPG is an indoor motion sensor kit that pairs an ERA-PIR passive infrared sensor with an ERA-RXPG plug-in receiver featuring a bright strobe light. The ERA-PIR monitors a doorway, hallway, or interior zone and sends a wireless signal up to 4,000 feet to the receiver when motion is detected. The ERA-RXPG then provides an audible chime, a flashing strobe, or both, making it useful in loud environments or for users who need a visual alert.

The Safeguard Supply ERA-PBDCR is a wireless push button door chime kit that pairs an ERA-PBTX long-range doorbell button with an ERA-DCRX multi-zone receiver. The weather-resistant push button can be mounted at an exterior door or entry gate and sends a signal up to 4,000 feet to the indoor receiver. The ERA-DCRX plays a selected chime tone, indicates which zone was triggered, and can activate 12VDC outputs or a C‑FORM relay for strobes, bells, or other devices.

The Safeguard Supply ERA-UTVPR is a wireless entry alert kit that pairs an ERA-UTX universal transmitter with an ERA-VPRX portable receiver. Use the ERA-UTX as a push button or door contact at an entrance, then carry the ERA-VPRX on a belt or in a pocket to receive sound and vibration alerts up to 4,000 feet away. This kit is ideal for businesses and larger homes where staff need mobile doorbell or door-open notifications.

The Safeguard Supply ERA-PBVPRX is a wireless doorbell kit that pairs an ERA-PBTX long-range push button with an ERA-VPRX portable receiver. Mount the weather-resistant button at an entrance or gate and carry the portable receiver on a belt or in a pocket to get sound and vibration alerts up to 4,000 feet away. This kit is ideal for warehouses, shops, and offices where staff need to know when visitors arrive without staying near a fixed chime.

The Safeguard Supply ERA-EXDCRX is a wired doorbell extender kit that uses an ERA-EXTX doorbell signal transmitter and an ERA-DCRX multi-zone receiver to carry your existing wired doorbell sound to distant areas. The ERA-EXTX connects to a traditional low-voltage chime and sends a wireless signal up to 4,000 feet to the ERA-DCRX. When a visitor presses your existing wired button, the original chime rings as usual and the ERA-DCRX plays a loud, selectable tone in another part of the building.

The Safeguard Supply ERA-UTRXPG is a wireless entry alert kit that pairs an ERA-UTX universal transmitter with an ERA-RXPG plug-in receiver. The ERA-UTX can function as a push button or as a magnetic door contact, sending a signal up to 4,000 feet when a visitor presses the button or a monitored door opens. The ERA-RXPG plugs into a wall outlet and provides sound, a bright flashing strobe, or both, making it useful for business entrances, interior doors, or access points where both audible and visual alerts are helpful.

The Safeguard Supply ERA-EXVPRX is a wired doorbell extender kit that uses an ERA-EXTX doorbell signal transmitter and an ERA-VPRX portable receiver to carry your existing wired doorbell to mobile staff. The ERA-EXTX connects to a standard low-voltage wired chime and sends a wireless signal up to 4,000 feet when a visitor presses the doorbell. The ERA-VPRX rides on a belt or in a pocket and alerts with sound, vibration, or both, so users know a doorbell has been pressed even when they are away from the original chime.

The Safeguard Supply ERA-DSVPRX is a long range driveway alert kit that combines an ERA-DSTX outdoor driveway motion sensor with an ERA-VPRX portable receiver. The sensor mounts near the drive and detects vehicles or people up to about 100 feet away, then sends an alert up to 4,000 feet to the handheld receiver. The ERA-VPRX offers sound, vibration, and visual indication so mobile staff know when someone arrives, even away from a desk or counter.

Build a custom ERA commercial alert system around the ERA-DCRX receiver: pick a sensor, the receiver, and an alert accessory. It carries a wireless range of up to 4,000 ft, four programmable zones with a 12V DC output each, and support for up to 12 transmitters, which suits warehouses, factories, and large commercial spaces that need a warehouse entrance alert or loading-dock signal.