4 interest-free payments of $21.49 with Afterpay
ERA-PRDCR is a wireless doorbell kit for setting up a complete alert path without building the system one part at a time. Start with one matched ERA transmitter and receiver setup.
Free shipping on orders over $100!
Expand or complete your system with compatible components.
ERA-RXPG
The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.
ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.
ERA-VPRX
The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.
ERA-PBTX
The ERA-PBTX wireless doorbell button transmits up to 4,000 ft to any ERA receiver, with a green LED for nighttime visibility and a weatherproof housing rated from -4°F to 140°F. The included lithium battery lasts 2-3 years, and you can mount it with the supplied tape or screws. A dependable outdoor doorbell button for large properties, gates, and driveways.
ERA-EXTX
The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.
ERA-UTX
The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.
ERA-PRDCR
ERA-PRDCR is a wireless doorbell kit for setting up a complete alert path without building the system one part at a time. Start with one matched ERA transmitter and receiver setup.
1 item selected · Total: $85.95
ERA-PRDCR is a wireless doorbell kit for setting up a complete alert path without building the system one part at a time. It is the right starting point when you want the transmitter and receiver chosen together from the same ERA family.
ERA-PRDCR is a wireless doorbell kit for setting up a complete alert path without building the system one part at a time. It is the right starting point when you want the transmitter and receiver chosen together from the same ERA family.
The stated range is line of sight. Walls, metal, concrete, brick, equipment, and receiver placement can reduce practical range inside real buildings.
The ERA-DCRX receiver in this kit uses its supplied plug-in AC/DC power adapter.
Check the label on your own power supply before use, as versions may differ. Keep the correct adapter with its receiver: the ERA-RXPG uses 5V DC; the ERA-DCRX and LRA-PLUG listed here supply 12V DC. Do not interchange adapters based only on plug fit. Replacement voltage, current capacity, connector size and polarity must match the receiver. These ratings apply to receiver power, not the transmitter or an existing wired doorbell transformer; electrical compatibility alone does not establish wireless approval in another country.
No reviews yet. If you've installed this system, we'd like to hear how it went.
Product questions answered by our team.
No answered questions yet for Safeguard Supply ERA-PRDCR Indoor Motion Sensor Entrance Alert.
Use these PDFs for installation, pairing, troubleshooting, and compliance details when they are included by the manufacturer.
Download the PDF resource for setup, product details, and support reference.
No. ERA is strongest for warehouses and large commercial spaces, but it also fits retail stores, offices, delivery doors, and remote entrances.
ERA receiver messaging highlights 12V DC outputs and C-FORM relay options on compatible models for external alert devices.
Yes. Concrete, brick, metal, and other materials reduce effective distance compared with open line-of-sight range.
Learn how to wire 12V strobes to the ERA-DCRX receiver, compare estimated wire distances, and plan multiple accessories within the 400mA output limit.
Read full answer →Q&AFind the right power adapter for your Safeguard Supply ERA or LRA receiver, understand voltage requirements, and prepare for use outside the United States.
Read full answer →Compare product families
SKU: ERA-PRXPG
The Safeguard Supply ERA-PRXPG is an indoor motion sensor kit that pairs an ERA-PIR passive infrared sensor with an ERA-RXPG plug-in receiver featuring a bright strobe light. The ERA-PIR monitors a doorway, hallway, or interior zone and sends a wireless signal up to 4,000 feet to the receiver when motion is detected. The ERA-RXPG then provides an audible chime, a flashing strobe, or both, making it useful in loud environments or for users who need a visual alert.
SKU: ERA-UTX
The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.
SKU: ERA-VPRX
The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.
SKU: ERA-PIR
The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.
