4 interest-free payments of $12.49 with Afterpay
The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.
Free shipping on orders over $100!
Expand or complete your system with compatible components.
ERA-RXPG
The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.
ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.
ERA-VPRX
The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.
ERA-EXTX
The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.
ERA-PIR
The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.
ERA-DSTX
The ERA-DSTX is an outdoor wireless motion detector with a 4,000 ft range and PIR sensing that picks up both vehicles and people. It works with every ERA receiver, including the ERA-DCRX desktop and ERA-VPRX portable units, and its weather-resistant housing holds up outdoors year-round. Use it as a driveway motion alarm or an entryway alert on large properties.
ERA-UTX
The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.
1 item selected · Total: $49.95
The ERA-UTX serves two roles: press it as a doorbell button, or mount its magnetic contact to signal when a door or window opens. Either way it sends an alert up to 4,000 ft to a paired ERA receiver, and its weather-resistant build suits indoor and outdoor entrances. It is part of the ERA series.
The ERA-UTX serves two roles: press it as a doorbell button, or mount its magnetic contact to signal when a door or window opens. Either way it sends an alert up to 4,000 ft to a paired ERA receiver, and its weather-resistant build suits indoor and outdoor entrances. It is part of the ERA series.
The ERA-UTX comes with a mounting plate and screws. Mount it with the included hardware, insert the battery, and pair it with your ERA receiver to start using it.
No reviews yet. If you've installed this system, we'd like to hear how it went.
Product questions answered by our team.
Question
How do I change the battery??
Asked by LAURA L.
Answer
Hello, flip the ERA-UTX over. You should silicone grommets, one at each corner. Pull those out and use a small screwdriver to unscrew the screws. Once the screws are out, separate the top half from the bottom where you will see the battery. https://secure.safeguardsupply.com/wp-content/uploads/pdf/ERA-UTX-Manual-2024_A4.pdf
Use these PDFs for installation, pairing, troubleshooting, and compliance details when they are included by the manufacturer.
Download the PDF resource for setup, product details, and support reference.
No. ERA is strongest for warehouses and large commercial spaces, but it also fits retail stores, offices, delivery doors, and remote entrances.
ERA receiver messaging highlights 12V DC outputs and C-FORM relay options on compatible models for external alert devices.
Yes. Concrete, brick, metal, and other materials reduce effective distance compared with open line-of-sight range.
Most modern wireless doorbell systems support multiple push buttons with distinct sounds. This guide explains how different manufacturers implement this feature and how to set it up.
Read full answer →Q&AConnect a DB-2000 bell to your ERA-DCRX receiver for enhanced sound output in noisy commercial environments. The ERA-DCRX delivers 95 dBA at 5 feet and supports various 12V DC alerting devices.
Read full answer →Compare product families
SKU: ERA-PRDCR
ERA-PRDCR is a wireless doorbell kit for setting up a complete alert path without building the system one part at a time. Start with one matched ERA transmitter and receiver setup.
SKU: ERA-PIR
The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.
SKU: ERA-DSRXPG
The Safeguard Supply ERA-DSRXPG is a long range driveway monitor kit that pairs an ERA-DSTX outdoor motion sensor with an ERA-RXPG plug-in receiver for monitoring driveways and approach lanes.[web:57][web:60] The sensor mounts near the drive and detects people or vehicles up to about 100 feet away, then sends a wireless signal up to 4,000 feet to the indoor receiver, which can use sound, strobe, or both to indicate activity.[web:57][web:60][web:63]
SKU: ERA-UTRXPG
The Safeguard Supply ERA-UTRXPG is a wireless entry alert kit that pairs an ERA-UTX universal transmitter with an ERA-RXPG plug-in receiver. The ERA-UTX can function as a push button or as a magnetic door contact, sending a signal up to 4,000 feet when a visitor presses the button or a monitored door opens. The ERA-RXPG plugs into a wall outlet and provides sound, a bright flashing strobe, or both, making it useful for business entrances, interior doors, or access points where both audible and visual alerts are helpful.
