Question 1

Additional Programming Tips for the LRA-DCRXS

Accepted Answer

The red LED in the strobe lens area indicates zone status during programming. Each zone can only have one transmitter paired, and LED behavior reveals whether zones are open or occupied.

Question 2

Can Two Push Buttons Play Different Sounds on a Wireless Chime Receiver?

Accepted Answer

Most modern wireless doorbell systems support multiple push buttons with distinct sounds. This guide explains how different manufacturers implement this feature and how to set it up.

Question 3

Does Removing Batteries Delete the Programming?

Accepted Answer

SS Series transmitters retain their programming during battery changes thanks to built-in permanent memory storage that operates independently of power.

Question 4

How to Change the Melody on the LRA-DCRXS Receiver

Accepted Answer

Change melodies on an LRA-DCRXS receiver that is already programmed to LRA transmitters. Different melodies can be assigned to different zones so users know which door triggered the receiver.

Question 5

How to Delete Programming Memory from a LRA Receiver

Accepted Answer

Each zone on an LRA receiver accommodates only one transmitter. Programming problems can often be resolved by deleting the receiver's memory and reprogramming.

Question 6

How to Program a Push Button or Sensor to the LRA-DCRXS

Accepted Answer

Instructions for programming an LRA transmitter/sensor to the LRA-DCRXS Receiver, which has two zones. Each zone can be assigned a different melody for identification.

Question 7

How to Replace the Battery in the LRA-PBTX Wireless Buttons

Accepted Answer

Follow these steps to replace the battery in the LRA-PBTX Wireless Push Button by Safeguard Supply.

Question 8

LRA Help Hub

Accepted Answer

Centralized help desk page for the LRA series of products by Safeguard Supply, gathering programming guides, manuals, and demonstration videos.

Question 9

LRA Series Compatibility Notice

Accepted Answer

The LRA series products were upgraded in 2021 with control board changes. Compatibility considerations apply only to systems purchased before 3/01/2021.

Question 10

No Sound Coming From the LRA-DCRX or LRA-DCRXS Chime Receiver

Accepted Answer

There are three available LRA receivers: the LRA-DCRX, LRA-DCRXS, and LRA-VPRX. Check that sound mode is enabled and volume is properly adjusted.

Question 11

Product User Manual: LRA-D1000S-L Doorbell Kit

Accepted Answer

The LRA-D1000S is a wireless door chime comprising the LRA-PBTXA-L wireless push button transmitter and LRA-DCRXSA-L receiver. This manual covers battery installation, pairing, and mounting procedures.

Question 12

Program a LRA Transmitter to the LRA-DCRX Receiver

Accepted Answer

This guide walks through programming a transmitter to an LRA-DCRX receiver. The functionality remains the same despite style changes in the LRA-D1000 product line.

Question 13

Programming & Tips for the LRA-C1000 (LRA-DCTX)

Accepted Answer

The LRA-C1000 is a long-range entry alert system designed for businesses, shops, warehouses, and larger homes with a transmitter and receiver that communicates up to 1,000 ft.

Question 14

Programming Problems with the LRA-DCRXS — Solid LED Light

Accepted Answer

A solid red LED on the LRA-DCRXS receiver indicates that both zones are already programmed with transmitters. To add new transmitters, the receiver memory must be deleted first.

Question 15

RED LED Indicator Lights on the LRA-DCRXS Plug-In Receiver

Accepted Answer

The red LED on the LRA-DCRXS receiver indicates low battery during normal operation and shows zone status during programming mode.

Question 16

Solutions When You Can't Hear Your Doorbell: Complete Guide

Accepted Answer

This guide explores effective solutions for poor doorbell coverage, focusing on wireless alternatives and doorbell extenders that provide maximum coverage throughout your home.

Question 17

Why Use Different Sounds for Each Zone in Your ERA Alert System

Accepted Answer

Set up distinct alert sounds for different zones in your ERA wireless alert system. Improve response time with instant entrance identification.

Question 18

Wire an External Device to the Relays on the LRA-DCRX

Accepted Answer

The LRA-DCRX receiver features a relay to integrate and activate external devices like strobe lights or 12V DC outputs. The relay works only with Zone 4 and requires a separate power supply.

LRA Products