Sale4 interest-free payments of $4.24 with Afterpay
The SS-STROBE-12V is a 12V LED strobe accessory that adds a bright visual alert to a compatible alert receiver. It flashes 140 times per minute, comes in multiple colors, and has a weatherproof, impact-resistant build rated from -4° to 140°F. Wire it to a 12V DC output such as the ERA-DCRX receiver for indoor or outdoor use.
SKU: SS-STROBE-A
Category: Accessories
Free shipping on orders over $100!
Expand or complete your system with compatible components.
ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.
ERA-UTDCR
The ERA-UTDCR wireless door alert system covers up to 4,000 ft and supports up to 12 transmitters with unlimited receivers, which suits warehouse entrance alerts and large commercial buildings. It offers 4-zone programming, selectable chimes, four 12V DC outputs, and a C-FORM relay for tying into other equipment. The kit installs plug-and-play with no special tools.
SS-FIREBELL12V
The SS-FIREBELL-12V is a 12V DC alarm bell that adds a loud 100dB signal to an alert system. Its motor-driven 6-inch gong cuts through noisy, industrial, and warehouse spaces, and it wires to any 12V DC output such as the ERA-DCRX receiver. Quick-connect terminals, RFI/EMI suppression, and indoor/outdoor rating make it straightforward to add.
DB-2000
The DB-2000 is a chrome-plated wired door bell buzzer for shop and warehouse entrances. At 2.5 inches in diameter, it runs on 4.5-12V DC or 8-16V AC and wires to a single door for a clear entry or delivery alert. It needs a transformer, push button, and bell wire to complete the installation.
The SS-STROBESIREN is a combination strobe light and siren that pairs a 110dB siren with a strobe flashing 120 times per minute. It runs on 12V DC, draws 70mA, and comes in red or blue with a flame-retardant ABS housing, making it a clear audio-visual alert for entry points, restricted areas, and warehouse or industrial spaces.
SS-PSIREN-W
The SS-PSIREN-W adjustable volume siren puts out 85-120 dB through an internal volume knob and two selectable tones, so you can set the alert level to the room. It runs on 12V DC, draws 100 mA or less, and wires into ERA receivers or any 12V output. The weather-resistant piezo housing suits warehouses, production floors, and mixed quiet-and-noisy spaces.
0 items selected · Total: $0.00
The SS-STROBE-12V is an LED strobe you wire to a compatible alert receiver to add a visual signal. Each flash is easy to catch across a room, which helps in noisy areas, quiet zones where a chime would disturb others, and outdoor or industrial locations. It is part of the strobe light range.
The SS-STROBE-12V is an LED strobe you wire to a compatible alert receiver to add a visual signal. Each flash is easy to catch across a room, which helps in noisy areas, quiet zones where a chime would disturb others, and outdoor or industrial locations. It is part of the strobe light range.
Mount the strobe with the included bracket, double-sided tape, or mounting screws for flexible positioning and a quick connection.
No reviews yet. If you've installed this system, we'd like to hear how it went.
Product questions answered by our team.
No answered questions yet for SS-STROBE: 12 Volt Strobe Light Accessory.
Use these PDFs for installation, pairing, troubleshooting, and compliance details when they are included by the manufacturer.
Download the PDF resource for setup, product details, and support reference.
No. Visual alerts are also useful for seniors, noisy work areas, quiet offices, and anyone who may miss a standard chime.
Many Safeguard receivers are described with sound and strobe modes, but the exact modes depend on the receiver model.
Place visual receivers where the strobe is easy to see from the normal seating, work, or sleeping area.
SS Series transmitters retain their programming during battery changes thanks to built-in permanent memory storage that operates independently of power.
Read full answer →Q&AWhere to find user manuals across the Safeguard Supply lineup. Each product page hosts the latest PDF manual for that SKU.
Read full answer →Compare product families
SKU: SS-SIREN
SS-SIREN is a siren for making an alert louder in shops, warehouses, counters, or work areas. Increase alert volume where a normal receiver is too easy to miss.
SKU: SS-PSIREN-W
The SS-PSIREN-W adjustable volume siren puts out 85-120 dB through an internal volume knob and two selectable tones, so you can set the alert level to the room. It runs on 12V DC, draws 100 mA or less, and wires into ERA receivers or any 12V output. The weather-resistant piezo housing suits warehouses, production floors, and mixed quiet-and-noisy spaces.
SKU: DB-2000
The DB-2000 is a chrome-plated wired door bell buzzer for shop and warehouse entrances. At 2.5 inches in diameter, it runs on 4.5-12V DC or 8-16V AC and wires to a single door for a clear entry or delivery alert. It needs a transformer, push button, and bell wire to complete the installation.
The SS-STROBESIREN is a combination strobe light and siren that pairs a 110dB siren with a strobe flashing 120 times per minute. It runs on 12V DC, draws 70mA, and comes in red or blue with a flame-retardant ABS housing, making it a clear audio-visual alert for entry points, restricted areas, and warehouse or industrial spaces.
