4 interest-free payments of $8.74 with Afterpay
The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.
Free shipping on orders over $100!
Expand or complete your system with compatible components.
ERA-RXPG
The ERA-RXPG is a plug-in receiver with a built-in strobe that pairs with up to 12 ERA transmitters and sensors, from push buttons to motion sensors and doorbell extenders. Run it in sound, strobe, or sound-and-strobe mode, with four volume levels up to 95 dB and a 4,000 ft range. A flexible alert point for property monitoring in noisy or quiet areas.
ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones , each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.
ERA-VPRX
The ERA-VPRX is a portable door buzzer for staff who move around a large facility. It clips to a belt and alerts you by sound, vibration, or both over a 4,000 ft range, and supports up to 16 transmitters, each with its own melody. The rechargeable receiver has 4 volume levels, an LED backlight, and up to 6-7 days of standby battery life.
ERA-PBTX
The ERA-PBTX wireless doorbell button transmits up to 4,000 ft to any ERA receiver, with a green LED for nighttime visibility and a weatherproof housing rated from -4°F to 140°F. The included lithium battery lasts 2-3 years, and you can mount it with the supplied tape or screws. A dependable outdoor doorbell button for large properties, gates, and driveways.
ERA-PIR
The ERA-PIR wireless motion sensor uses passive infrared to detect movement and signal any ERA receiver over a 4,000 ft line-of-sight range. Its detection field adjusts from 9 to 18.5 ft wide, so you can aim it at an entrance, hallway, or driveway and cut down on false alerts. It runs up to 12 months on a 9V battery and includes an aluminum mounting bracket.
ERA-UTX
The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.
ERA-EXTX
The ERA-EXTX is a doorbell signal transmitter that wires into your existing wired doorbell and broadcasts the press up to 4,000 ft to compatible ERA receivers. It is battery-powered, supports front and back doorbells on the same system, and works with all ERA receivers. Note: it is not compatible with video doorbells.
1 item selected · Total: $34.95
The ERA-EXTX is the wired-in transmitter that turns a standard wired doorbell into a wireless one. When the doorbell is pressed, the ERA-EXTX sends the signal to any paired ERA receiver up to 4,000 ft away. Use it to add range and extra chimes to a doorbell you already have. It is part of the doorbell extender range.
The ERA-EXTX is the wired-in transmitter that turns a standard wired doorbell into a wireless one. When the doorbell is pressed, the ERA-EXTX sends the signal to any paired ERA receiver up to 4,000 ft away. Use it to add range and extra chimes to a doorbell you already have. It is part of the doorbell extender range.
The ERA-EXTX installs at your existing doorbell chime. Connect three wires to your current system following the wiring diagram. No special tools are required for a basic setup.
No reviews yet. If you've installed this system, we'd like to hear how it went.
Product questions answered by our team.
No answered questions yet for Doorbell Signal Transmitter: ERA-EXTX.
Use these PDFs for installation, pairing, troubleshooting, and compliance details when they are included by the manufacturer.
Download the PDF resource for setup, product details, and support reference.
No. Extender products are positioned to keep the existing wired chime and add wireless receivers elsewhere.
Yes. Choose receivers from the same compatible family so alerts can be heard or seen in more areas.
Safeguard product copy notes that these extender transmitters are not compatible with video doorbells.
Two methods to use wired doorbell push buttons with wireless door chime receivers: door chime extenders and ERA-UTX universal transmitters.
Read full answer →Q&ALearn expert doorbell wiring techniques to connect two chimes to one transformer. Step-by-step guide with essential safety tips and wiring diagrams for home installation.
Read full answer →Compare product families
SKU: ERA-DCRX
The ERA-DCRX is a commercial wireless door chime receiver with four programmable zones, each with its own 12V DC output and a shared C-FORM relay for triggering external devices. It works with up to 12 ERA transmitters (three per zone) over a 4,000 ft line-of-sight range, so it suits offices, shops, and warehouses that need zoned entrance alerts and device control.
SKU: ERA-DCKIT
The ERA-DCKIT is a wireless strobe light doorbell kit with a 4,000 ft range, built for large homes and commercial buildings where an audible chime alone can be missed. It pairs a weatherproof push button with a strobe-equipped receiver that flashes and chimes at the same time. Choose from four volume levels, and add up to 12 transmitters to cover more entrances.
SKU: ERA-UTX
The ERA-UTX is a wireless door sensor button that works as either a push button or a magnetic door/window contact, with a range up to 4,000 ft. It has a weatherproof build for indoor or outdoor use, an 18-month battery life, and works with all ERA receivers. Use it for entrance, delivery, and loading-dock alerts.
SKU: ERA-UTDCR
The ERA-UTDCR wireless door alert system covers up to 4,000 ft and supports up to 12 transmitters with unlimited receivers, which suits warehouse entrance alerts and large commercial buildings. It offers 4-zone programming, selectable chimes, four 12V DC outputs, and a C-FORM relay for tying into other equipment. The kit installs plug-and-play with no special tools.
